RECORD THIS INFORMATION FOR FUTURE REFERENCEBEFORE INSTALLING THE UNIT:Model No. Serial No.Product No.Date Purchased Place of PurchaseREFRIGERATOR MOD
10Making ice cubesIce cubes are best frozen overnight. At night, the refrigerator has less work to do and the unit has more reserves.DefrostingAs time
11Door lockingSwitching offWinter operation1. Check that the ventilation grills have not been blocked by snow, leaves or similar.5.82. When the ambien
12Interior lightChanging the light bulbsChanging the decor panelDimensions of the panels :upper panel lower panel5.105.111. Remove cover.2. Detach def
13Changing the doorhang5.12It is not always possible to change the door when the refrigerator is installed.1. Remove rotary knobs and unscrew control
14Troubleshooting5.13Failure : The refrigerator does not work in gas operation mode.Possible cause Action you can takea.) Gas bottle empty.b.) Is the
15Maintenance Works on gas components and electrical installation may only be carried out by authorised personnel. We recommend to contact your Domet
16Technical dataINSTALLATION GUIDEOn installation of the appliance, the technical and administrative regulations of the country in which the vehicle w
17Side installationIf the appliance is installed on the same side of the vehicle as the entrance door, it is desirable that the door does not cover th
18Draught-free installationThe refrigerator must be sealed in such a way, that no air from the living area can get to the gas burner and no draughts c
19Ventilation and extractionA correct installation is important for correct operation of the appliance to ensure, there is no build-up of heat at the
2Instructions for storing food in a refrigerator:No refrigerator of any kind can improve the quality of the food; refrigerators can only maintain the
20Installing the ventilation system6.43. Insert the ventilationgrilles.5. Insert winter cover2. Insert the frame andscrew into position.2 . Place the
21Installation recessThe refrigerator must be installed draught-free in a recess (see “6.2”). The measurements of the recess are given in the table be
22Connections for gas / electrical installationGas installationThe rules in point 6.1 must be adhered to.When running on gas, these appliances are
The gas connection to the appliance is effected by means of a suitablecoupling tube fitting.Hook-up to the gas supply line is accomplished at the ma
24Electrical installationElectrical installation may only be carried out by qualified personnel.The connection cables must be laid in such a way that
25Terminal strip DCconnections Connections:A = Ground heating element DCB = Plus heating element DC C = Ground electronicsD = Plus electronics6.9.3DCA
26Wiring diagram6.9.4Connections:A = Ground heating element DCB = Plus heating element DC C = Ground electronicsD = Plus electronicsColours:schwarz =
27
31.0 INTRODUCTION 42.0 FOR YOUR SAFETY 42.1 Warning and safety notices 42.2 Coolant 4 3.0 WARRANTY AND CUSTOMER 5SERVICE3.1 Damages in trans
4INTRODUCTIONYou have made an excellent choice in selecting the Dometic Absorption Refrigerator.We are sure that you will be fully satisfied with your
5WARRANTY AND CUSTOMER SERVICEWarranty arrangements are in accordance with EC Directive 44/1999/CE and the normal conditions applicable for the countr
6Using the refrigerator The cooling unit is silent in operation. When the appliance is first put into operation, there may be a mild odour which wi
7Electrical operation1. 12V - operation (DC)The refrigerator should only be used while the motor is running, otherwisethe on-board-battery would be di
8Gas operationThe refrigerator should only be operated using liquid gas (propane, butane). Do not use town gas or natural gas.If the refrigerator
Frame heating Temperature setting cooling compartmentAs shown, you are able to regulate the temperature ofthe cooling compartment, if necessary, by tu
Kommentare zu diesen Handbüchern