Dometic DW2410 Bedienungsanleitung Seite 7

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 16
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 6
- 7 -
Water hardness level
°d
1)
mmol/l
2)
Setting on the
water softener
Number of
light flashes
> 24 > 4,2
22 - 24 3,9 - 4,2
20 - 22 3,6 - 3,9
18 - 20 3,2 - 3,6
16 - 18
2,8 - 3,2
13 - 16 2,3 - 2,8
10 - 13 1,8 - 2,3
7 - 10 1,2 - 1,8
4 - 7 0,7 - 1,2
below 4 below 0,7
10
9
8
7
6
5 *
4
3
2
1
10
9
8
7
6
5
4
3
2
1
no salt is needed
1. Press in the On/Off button.
2. Press the programme selection/cancel button and
hold it pressed until indicator lamp 1 starts to
flash and lamp 2 illuminates with a fixed light.
Lamp 2 goes out after approx. 3 seconds and
simultaneously the ended programme cycle
indicator starts flashing.
-
The number of flashes for the ended programme
cycle are equivalent to the set water hardness
level.
- This sequence of flashes is repeated several
times after a few seconds pause.
3. The water hardness level is raised by 1 step
every time you press the programme selection/
cancel button.
After hardness level 10 comes hardness level 1.
4. Press the On/Off button when the required water
hardness level is selected. This saves the setting.
If the setting 1 is chosen, the salt indicator lamp
does not light up.
Adjusting the water softener
T
o prevent limescaling on the dishes and to the interior of the
dishwasher, the dishes must be washed with soft water.
This dishwasher is equipped with a water softener, where tap-
water which is harder than 4 °d (german degree) is softened.
Adjust the water softener according to the table below for the
water hardness level for your area.
C
ontact your local Water Authority to find the
exact water hardness level for your area.
The water softener has 10 settings:
In the following setting, the dishwasher must be switched off and all programmes completed.
See chapter ”Using the appliance” for information on how to complete the programme.
1) german degree of measurement for the water hardness
2) millimol, internationel unit for water hardness
*) factory setting
Seitenansicht 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare