Dometic RM7851L Bedienungsanleitung Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 28
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
18
Draught-free installation
The refrigerator must be sealed in such a way, that no air from the living area
can get to the gas burner and no draughts counter enter the living aera as well.
Illustrated below are two typical approved methods of sealing.
Proposal :
Using the Installation Sealing Kit from Dometic
(available from Dometic)
Insert lipped seals (A) into the installation recesses
at the bottom and at each side (FIG 1, 2, 3).
Insert deflector plate (B), fitted with a lipped seal (A)
of heavy-duty, non- flammable material, into the
installation recess (see Fig. 4).
Insert deflector plate (B) in such a way that the hot
air escapes through the air vent grille into the open
air. Affix the discharge plate to the caravan wall, not
to the refrigerator !
In addition, discharge plate (B) with its lipped seal
(A) must seal the refrigerator off from the living area
(see FIG. 1,4).
Ensure that the
refrigerator is
installed level in
the recess.
Finally, push the refrigerator into the recess from the front.
This installation option facilitates the removal and installation of the appliance
for servicing.
Comment:
Other methods of sealing may be approved. However the chosen method must prevent draughts entering
the living space of the motorhome. Failure to seal correctly will allow warm air to collect around the refri-
gerator and its performance will be affected. If the cavity between the vehicle’s wall and the refrigerator is
sealed so that fumes cannot penetrate the living area it is possible to vent the flue gas directly through
the upper grille. Do not use any kind of aluminium flue pipe (e.g. T-piece) to lead the flue gas out.
6.2
FIG. 1
FIG. 2
FIG. 3
FIG. 4
A
A
A
B
B
Deviations shall require the consent of the manufacturer.
DO NOT use any easily inflammable materials (in particular silicone sea-
ling agent or similar) for sealing! The device manufacturer's product liabili-
ty and guarantee shall lapse if such materials are used.
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare