Dometic HIPRO4000 Bedienungsanleitung PDF herunterladen (Seite 13)

Check List

13

5.8

Failure : No cooling (the aggregate at the back of the device is cold).

Possible Cause Self Help Authorised Service

a.) The device plug is not

plugged in.

b.) No voltage in socket.

c.) Defective electronics or

sensor feelers. LED flashes ?

d.) Defective heating element.

e.) The device is in its defrosting

phase.

a.) Plug in device plug.

b.) Check main fuse.

e.) See operating instruction

5.3

c.) Install new

electronics or sensor.

d.) Install new heating

element.

Failure : No cooling (the aggregate is warm).

Possible Cause Self Help Authorised Service

a.) The device is not level.

Leakage test ?

b.) The device was only

switched on a short while

ago.

c.) Defective cooling unit.

a.) Level the device using a

spirit level.

b.) Switch on the device and

let it run for 5-6 hours.

c.) Exchange device.

Failure : Poor cooling performance.

Possible Cause Self Help Authorised Service

a.) The cooling aggregate is not

sufficiently ventilated.

b.) The device is exposed to

direct sunlight.

c.) The fridge door does not

close tightly

d.) The fridge was stocked a

short while ago.

a.) Check that the ventilation

grids are not covered.

Check that device has

been installed properly

(installation instruction 4.5).

b.) Follow installation

instruction 4.5.

c.) Check installation in line

4.5 + 4.8.

d.) Check fridge after

5-6 hours for proper

cooling function.

c.) Install new doorseal,

if necessary.

Failure : Frost formation in fridge.

Possible Cause Self Help Authorised Service

a.) The fridge door does not

close tightly.

a.) Check installation is in line

with 4.5 + 4.8.

a.) Install new doorseal,

if necessary.

1 2 ... 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare