Dometic RM7851L Bedienungsanleitung PDF herunterladen (Seite 23)



The gas connection to the appliance is effected by means of a suitable

coupling tube fitting.

Hook-up to the gas supply line is accomplished at the manual gas shutoff valve,

which is furnished with a 3/8" SAE (UNF 5/8" - 18) male flare connection. Always use

a backup wrench when connecting the gas supply line to the gas inlet fitting.

The gas connection may only be carried out by a qualified personnel.

Following proper installation, a testing for leakage and a flame test must be car-

ried out by *qualified personnel. A certificate of testing must be issued.

* qualified personnel

Qualified personnel are accredited experts who are able, by virtue of their training and knowledge,

to vouch for the correct implementation of the leakage test.

The refrigerator must be equipped with a gas cock

Such a cut-out device must be readily accessible to the user.

SW 14

SW 17

AATTTTEENNTTIIOONN

20 Nm

max

15 Nm

max

Gas supply

LP GAS

CYLINDER

PRESSURE

REGULATOR

REFRIGERATOR

The gas supply system must incorporate a pressure regulator to maintain a supply pres-

sure of not more than 13.5 inches water column, static (no load).When testing the gas

supply system at test pressures in excess of 1/2 psig, the refrigerator and its individual

shutoff valve must be disconnected from the gas supply piping system.

When testing the gas supply system at pressures less than or equal to 1/2 psig, the

appliance must be isolated from the gas supply piping by closing its individual manual

shutoff valve.

In case detailed instructions on the installation and connection to the gas supply are

required, contact your dealer or distributor.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Keine Kommentare

Dometic RM7851L Bedienungsanleitung Seite 23