Dometic RM2354 Betriebsanleitung

INSTALLATION ANDOPERATING INSTRUCTIONSREFRIGERATOR FOR LP-GAS AND ELECTRIC OPERATIONRM2354USA Corporate Office CANADAService Office 2320 Industrial Pa

10Refrigerator control panelDESCRIPTION OF OPERATING MODESAUTO MODEWhen operating in the AUTO mode, the AUTO modeindicator lamp (D) will illuminate.Th

11HOW TO USE THE REFRIGERATORFOOD STORAGE COMPARTMENTThe food storage compartment is completely closed andunventilated, which is necessary to maintain

12MAINTENANCE & SERVICEThe user should be aware of service that must bedone on a regular schedule to keep the refrigeratoroperating properly. The

13C. Check the AMES control system by connecting/dis-connecting 120 volt AC power, start/stop the engine,etc. Compare the operation with the operation

14F. Improperly set thermostat.See section Operating Instructions, part Start UpInstructions.G. Burner dirty.Clean. (See section Maintenance & Ser

15Put a screwdriver into the slot of the shelf lock.Turn the screwdriver counterclockwise.Remove the shelf locks from the wire shelf.Slide the wire sh

16RM2354MO-FO 0438

3FIG. 1ReigniterPower modulecoverFlexible cord12 V DCTerminal blockInlet fittingManual gas shutoff valveBurner jetScrew for protection coverProtection

4INSTALLATIONGENERAL INSTRUCTIONThis appliance is designed for storage of foods andstorage of frozen foods and making ice.This appliance is certified

5VENTILATION HEIGHTSRefer to FIG. 3a, 3b and 4.CLEARANCESMinimum clearances in inches to combustible materialsare:G: Top 0K: Side 0L: Bottom 0M: Rear

6INSTALLING REFRIGERATOR INENCLOSURENOTE: DO NOT install the appliance directly oncarpeting. Carpeting must be removed orprotected by a metal or wood

7TESTING LP GAS SAFETY SHUTOFFThe gas safety shutoff must be tested after the re-frigerator is connected to the LP gas supply.To test the gas safety s

8OPERATINGINSTRUCTIONSIMPORTANCE OF LEVELING AREFRIGERATORIn an absorption refrigerator system, ammonia is lique-fied in the finned condenser coil at

9Refrigerator control panelDC MODE1. Press the DC mode indicator button (2) to turn ONthe DC lamp (A).2. Press the TEMPERATURE SELECTOR button (4)unti