
15
The cable is to be mounted in the sockets on the generator as shown in
Figure 7. Each cable conductor is marked with a number between 1 and 5.
These shall be mounted in the socket plug corresponding to the same
number as the generator cables. Greatest carefulness should be taken
when mounting the cables into the socket plugs. As a result of a faulty
connection the rotor will be demagnetized and must be re-magnetized, see
further section 6.
Travel Power should never be used unless all parts in the shielded
cable are carefully connected in both ends.
The contact should be carefully secured over the shield at both ends.
Make sure that the shield is carefully grounded at both ends.
Figure 7. Shielded cable connection on the generator
Kommentare zu diesen Handbüchern